API 文档

History
Introduction
API Category
Making API Requests
- Request Structure
- Common Params
- Signature v3
- Signature
- Responses
Site APIs
- CreateZone
- DescribeIdentifications
- ModifyZone
- DeleteZone
- ModifyZoneStatus
- CheckCnameStatus
- IdentifyZone
- DescribeZones
- VerifyOwnership
Acceleration Domain Management APIs
- CreateAccelerationDomain
- DescribeAccelerationDomains
- ModifyAccelerationDomain
- ModifyAccelerationDomainStatuses
- DeleteAccelerationDomains
- CreateSharedCNAME
- BindSharedCNAME
- DeleteSharedCNAME
Site Acceleration Configuration APIs
- CreateRule
- DeleteRules
- DescribeHostsSetting
- DescribeRules
- DescribeRulesSetting
- DescribeZoneSetting
- ModifyRule
- ModifyZoneSetting
Alias Domain APIs
- CreateAliasDomain
- DescribeAliasDomains
- ModifyAliasDomain
- ModifyAliasDomainStatus
- DeleteAliasDomain
Security Configuration APIs
- CreateSecurityIPGroup
- DescribeSecurityIPGroup
- ModifySecurityIPGroup
- DeleteSecurityIPGroup
- DescribeOriginProtection
- DescribeSecurityTemplateBindings
- ModifySecurityPolicy
- BindSecurityTemplateToEntity
- DescribeSecurityIPGroupInfo
Layer 4 Application Proxy APIs
- CreateL4Proxy
- ModifyL4Proxy
- ModifyL4ProxyStatus
- DescribeL4Proxy
- DeleteL4Proxy
- CreateL4ProxyRules
- ModifyL4ProxyRules
- ModifyL4ProxyRulesStatus
- DescribeL4ProxyRules
- DeleteL4ProxyRules
- CreateApplicationProxy
- ModifyApplicationProxy
- ModifyApplicationProxyStatus
- DescribeApplicationProxies
- DeleteApplicationProxy
- CreateApplicationProxyRule
- ModifyApplicationProxyRule
- ModifyApplicationProxyRuleStatus
- DeleteApplicationProxyRule
Content Management APIs
- CreatePurgeTask
- DescribePurgeTasks
- CreatePrefetchTask
- DescribePrefetchTasks
- DescribeContentQuota
Data Analysis APIs
- DescribeDDoSAttackData
- DescribeDDoSAttackEvent
- DescribeDDoSAttackTopData
- DescribeOverviewL7Data
- DescribeTimingL4Data
- DescribeTimingL7AnalysisData
- DescribeTopL7AnalysisData
- DescribeTimingL7CacheData
- DescribeTopL7CacheData
Log Service APIs
- DownloadL7Logs
- DownloadL4Logs
- CreateCLSIndex
- CreateRealtimeLogDeliveryTask
- ModifyRealtimeLogDeliveryTask
- DeleteRealtimeLogDeliveryTask
- DescribeRealtimeLogDeliveryTasks
Billing APIs
- CreatePlan
- UpgradePlan
- RenewPlan
- ModifyPlan
- IncreasePlanQuota
- DestroyPlan
- CreatePlanForZone
- BindZoneToPlan
- DescribeBillingData
- DescribeAvailablePlans
Certificate APIs
- DescribeDefaultCertificates
- ModifyHostsCertificate
Load Balancing APIs
- CreateOriginGroup
- ModifyOriginGroup
- DeleteOriginGroup
- DescribeOriginGroup
Custom Response Page APIs
- CreateCustomizeErrorPage
- DescribeCustomErrorPages
- ModifyCustomErrorPage
- DeleteCustomErrorPage
Diagnostic Tool APIs
- DescribeIPRegion
Version Management APIs
- CreateConfigGroupVersion
- DeployConfigGroupVersion
- DescribeConfigGroupVersionDetail
- DescribeConfigGroupVersions
- DescribeDeployHistory
- DescribeEnvironments
Data Types
Error Codes

当前内容仅提供英语版本，中文版我们将尽快补充，感谢您的理解。

DescribeDDoSAttackData

1. API Description

Domain name for API request: teo.intl.tencentcloudapi.com.

This API is used to query the time-series data of DDoS attacks.

A maximum of 100 requests can be initiated per second for this API.

We recommend you to use API Explorer

Try it

API Explorer provides a range of capabilities, including online call, signature authentication, SDK code generation, and API quick search. It enables you to view the request, response, and auto-generated examples.

2. Input Parameters

The following request parameter list only provides API request parameters and some common parameters. For the complete common parameter list, see Common Request Parameters.

Parameter Name	Required	Type	Description
Action	Yes	String	Common Params. The value used for this API: DescribeDDoSAttackData.
Version	Yes	String	Common Params. The value used for this API: 2022-09-01.
Region	No	String	Common Params. This parameter is not required.
StartTime	Yes	Timestamp ISO8601	The start time.
EndTime	Yes	Timestamp ISO8601	End time. the query time range (`EndTime` - `StartTime`) must be less than or equal to 31 days.
MetricNames.N	Yes	Array of String	Statistical metrics. `ddos_attackMaxBandwidth`: Peak attack bandwidth; `ddos_attackMaxPackageRate`: Peak attack packet rate; `ddos_attackBandwidth`: Time-series data of attack bandwidth; `ddos_attackPackageRate`: Time-series data of attack packet rate.
ZoneIds.N	No	Array of String	Site ID set. this parameter is required. a maximum of 100 site ids can be imported. use `*` to query data for all sites under the tencent cloud root account. to query account-level data, you must have resource permissions for all sites in this api.
PolicyIds.N	No	Array of Integer	IDs of DDoS policies to be queried. All policies will be selected if this field is not specified.
Interval	No	String	Query period granularity. Valid values: min: 1 minute; 5min: 5 minutes; hour: 1 hour; day: 1 day. If this parameter is not filled in, the granularity will be automatically calculated based on the interval between the start time and end time. Specifically, data will be queried with a granularity of min, 5min, hour, and day respectively when the period is no more than 2 hours, no more than 2 days, no more than 7 days, and over 7 days.
Area	No	String	Geolocation scope. Values: `overseas`: Regions outside the Chinese mainland `mainland`: Chinese mainland `global`: Global If this field is not specified, the default value `global` is used.

3. Output Parameters

Parameter Name	Type	Description
TotalCount	Integer	Total number of query results.
Data	Array of SecEntry	List of DDoS attack data. Note: This field may return null, indicating that no valid values can be obtained.
RequestId	String	The unique request ID, generated by the server, will be returned for every request (if the request fails to reach the server for other reasons, the request will not obtain a RequestId). RequestId is required for locating a problem.

4. Example

Example1 Querying the Time-series Data of DDoS Attacks

Input Example

POST / HTTP/1.1
Host: teo.intl.tencentcloudapi.com
Content-Type: application/json
X-TC-Action: DescribeDDoSAttackData
<Common request parameters>
{
    "MetricNames": [
        "ddos_attackMaxBandwidth"
    ],
    "Interval": "min",
    "PolicyIds": [
        1706
    ],
    "ZoneIds": [
        "zone-21xfqlh4qjee"
    ],
    "StartTime": "2022-08-22T00:00:00+00:00",
    "EndTime": "2022-08-23T00:00:00+00:00",
    "Area": "overseas"
}

Output Example

{
    "Response": {
        "TotalCount": 1,
        "Data": [
            {
                "Value": [
                    {
                        "Max": 100,
                        "Metric": "ddos_attackMaxBandwidth",
                        "Avg": 100.0,
                        "Detail": [
                            {
                                "Value": 100
                            }
                        ],
                        "Sum": 100.0
                    }
                ],
                "Key": "ddos_attackMaxBandwidth"
            }
        ],
        "RequestId": "a79e60f8-34cc-4ee5-a7f9-a24adb572c68"
    }
}

5. Developer Resources

SDK

TencentCloud API 3.0 integrates SDKs that support various programming languages to make it easier for you to call APIs.

Command Line Interface

Tencent Cloud CLI 3.0

6. Error Code

The following only lists the error codes related to the API business logic. For other error codes, see Common Error Codes.

Error Code	Description
FailedOperation	Operation failed.
InternalError.ProxyServer	An unknown error occurred in the backend server.
LimitExceeded	The quota limit has been reached.
LimitExceeded.QueryTimeLimitExceeded	Query time limit exceeded.
ResourceNotFound	The resource doesn’t exist.
UnauthorizedOperation.CamUnauthorized	CAM is not authorized.
UnauthorizedOperation.NoPermission	The sub-account is not authorized for the operation. Please get permissions first.

1. API Description
2. Input Parameters
3. Output Parameters
4. Example
Example1 Querying the Time-series Data of DDoS Attacks
5. Developer Resources
SDK
Command Line Interface
6. Error Code